Open now · 24-hour emergency service Sunday to Friday: open 24 hours · Saturday: closed 1 Mockingbird Circle, Houston, TX 77074
4.7from 113 Google reviews Shower and tub valves: repair, rebuild or replace

Shower Valve Replacement in Houston, TX

Shower that drips, scalds or will not shut off? The valve behind the wall is the fix.

A shower that keeps dripping, swings from cold to scalding when someone flushes, or barely turns on usually has a worn cartridge or a failing valve body inside the wall. Royal Flush Affordable Plumbing repairs, rebuilds and replaces shower and tub valves across Houston, from old three-handle tub valves to single-handle valves behind marble, and we work carefully to save the tile wherever we can.

  • Tub and shower valves
  • Tile protected wherever possible
  • Price agreed before any work

Get a shower valve quote

Tell us the symptom. A plumber calls back with a price range, not a call center.
Get my free quote

We only use your number to call you back about this job. No spam, ever.

Prefer to talk? 281-612-1015

Signs you need this

Signs the problem is the shower valve.

The handle and trim are only the outside. These symptoms come from the valve or the cartridge in the wall.

The shower drips after it is turned off

A worn cartridge or washers. Left alone, a steady drip wastes a lot of water and stains the tub or tile.

Temperature jumps when someone flushes

Older valves without pressure balancing, or a balancing cartridge that has stopped working. That jump is a scald risk.

Weak flow from the shower head

Mineral scale in the cartridge or valve body, a common problem with Houston's hard water.

The handle is stiff, loose or spins

A worn stem or a broken cartridge. Forcing it can break the valve inside the wall.

Water stains or a soft wall behind the shower

A leak at the valve body or its pipe connections inside the wall. This one should not wait.

An old three-handle tub valve

Separate hot, cold and diverter handles from decades ago. Stems can often be rebuilt, or the valve replaced with a modern single-handle valve.

A new shower mixing valve with its plaster guard, piped in copper inside an opened wall
Since 2007licensed and insured
Repair first, replace when needed

A new cartridge, a rebuilt stem or a new valve body.

Many shower problems are solved without opening the wall: a new cartridge, new stems and seats in an older valve, or a new trim kit. When the valve body itself is leaking, corroded or no longer made, it is replaced. We reach it from behind through an access panel or the closet on the other side of the wall when there is one, or through a carefully cut opening in the tile that is sized to be covered by a larger trim plate.

Houston follows the Uniform Plumbing Code, which requires a new shower or tub-shower valve to have scald protection: a pressure-balance or thermostatic valve with a limit on the hottest water. If your old valve does not have it, the replacement will. Before we start, you get the options for your shower and the price for each, with no hidden charges.

  • Cartridges and stemsCommon brands' cartridges replaced, and old stems and seats rebuilt where the valve is still sound.
  • Scald protectionReplacement valves are pressure-balance or thermostatic, as the code requires.
  • Tile-friendly accessFrom behind when possible, or a small opening sized to sit under a larger trim plate.
How we fix it

How a shower valve job goes.

A cartridge or stem repair is usually a single visit. A full valve replacement can take longer, and we tell you that before starting.

Before we arrive

If the shower will not shut off, close the shut-off valves for that bathroom if it has them, or the main water valve for the house. Note the brand on the trim or handle if you can see it, and take a photo of the valve plate.

Call 281-612-1015
  1. 1
    Step 1

    Tell us the symptom

    Drip, scalding, weak flow, a stiff handle or a leak in the wall, plus the brand or a photo of the trim.

  2. 2
    Step 2

    Diagnose the valve

    We remove the trim, check the cartridge or stems, the valve body and the connections, and find what has failed.

  3. 3
    Step 3

    Options and price

    Cartridge, rebuild, trim kit or full valve replacement, with the price for each and how the wall will be accessed.

  4. 4
    Step 4

    Install and test

    The repair or new valve is installed, tested for leaks and temperature, and the trim is set straight and sealed.

What affects the price

What changes the price of a shower valve repair.

You get the price before any work starts. These are the main factors.

Cartridge or full valve

A cartridge or stem repair is the smallest job. Replacing the valve body inside the wall is the largest.

How the wall is reached

An access panel or a closet behind the shower makes it easier. Tile, stone and fiberglass surrounds each need a different approach.

The valve and brand

Parts for common brands are easy to get. Discontinued or unusual valves may need a new valve to fit modern parts.

The pipes behind it

Old galvanized pipe at the valve is often replaced at the same time, because it is usually the next thing to fail.

The coupon

$25 off any plumbing service. One coupon per job; competitor coupons accepted.

Shower Valve Replacement FAQs

Shower valve questions.

Still not sure? Call and describe the problem. We’ll tell you honestly whether it’s a 20-minute fix or a job worth quoting.

Ask a plumber: 281-612-1015
01Can you replace a shower valve without removing the tile?
Often, yes. If there is a closet or access panel behind the shower, we work from that side. If not, we cut a small, neat opening around the valve that a larger trim plate covers. Some stone or tile layouts make that harder, and we tell you before starting.
02My shower drips after I turn it off. Is that the valve?
Almost always. The cartridge or washers inside the valve are worn. Replacing the cartridge, or rebuilding the stems on an older valve, usually fixes it without opening the wall.
03Why does my shower get hot when someone flushes?
When the toilet fills, it takes cold water and the shower mix gets hotter. A pressure-balance valve corrects that. If yours is old or the cartridge is worn, it stops working. A new cartridge or a new valve fixes it.
04Do you rebuild old three-handle tub valves?
Yes. If the valve body is sound, new stems, seats and handles often bring it back. If it is corroded or parts are no longer made, we replace it with a modern valve.
05Does a new shower valve need to meet code?
Yes. Houston follows the Uniform Plumbing Code, which requires shower and tub-shower valves to have scald protection. Any valve we install meets that requirement.
06Is the plumber licensed?
Yes. Royal Flush Affordable Plumbing is licensed and insured and works under Texas Responsible Master Plumber License RMPL #42403.
Google reviews

What Houston says after the job is done.

Pulled straight from our Google Business Profile.

4.7 113 Google reviews Google Business Profile
Latest review
Gabriel Gonzalez
Gabriel Gonzalez Google review · 2 weeks ago

They were timely, professional, knowledgeable, and fairly priced.

See this review on Google
Ready when you are

Shower dripping or scalding? Get the valve fixed.

Tell us what the shower is doing and send a photo of the trim. A licensed plumber tells you the options and the price before any work starts.

Request a callback

Name and number is enough. A plumber calls you back.

Call me back