Putting in a disposal looks like a one-hour job, and for a plumber it nearly is. The surprises come from the details around it: whether there is power under the sink, whether the dishwasher can drain through it, and whether the old drain pipe is in good enough shape to be reconnected.

Quick answer

A disposal installation means removing the old unit or the sink strainer, fitting the mounting ring, connecting the drain and the dishwasher hose, wiring or plugging in the unit, and testing for leaks. Before you buy, check the cabinet space, whether a switched outlet or a hardwired connection is available, the motor size that suits your household, and the condition of the drain pipe.

Key takeaways
  • Check for power under the sink first. A disposal needs a switch and a safe electrical connection.
  • Motor size is about how much you use it, not about how strong it is. A mid-size motor suits most households.
  • The dishwasher drain knockout inside a new unit has to be opened, or the dishwasher will back up.
  • Septic systems and disposals need care. Ask before installing one if your home is on septic.
  • A plumber checks the trap and drain while the old unit is out. That is the cheapest time to catch a problem.

What the job involves

  1. Power off. The circuit is switched off and tested.
  2. Remove the old unit, or the plain strainer if there was none, along with the drain and the mounting ring.
  3. Prepare the new unit. If the dishwasher connects to it, the knockout plug in the dishwasher inlet is removed.
  4. Mount the unit. The sink flange is sealed with plumber's putty or a gasket, and the unit locks onto the mounting ring.
  5. Connect the drain, the trap and the dishwasher hose.
  6. Make the electrical connection. Either a power cord into an outlet under the sink, or a wired connection with a switch.
  7. Test. Run water, run the unit, run the dishwasher, and look at every joint for leaks.

Things to check before you buy

  • Space. Measure the depth of the cabinet below the sink drain. Larger motors are taller.
  • Power. A grounded outlet under the sink, on a circuit that suits the unit, with a switch you can reach. If there is none, an electrician or a plumber with the right qualifications adds one.
  • Motor size. Smaller units suit one or two people who cook lightly. Mid-size units are the usual choice for families. Larger ones are for heavy use.
  • Feed type. A continuous-feed unit runs while the switch is on. A batch-feed unit runs only when the stopper is in place, which is safer around children.
  • Septic. If your home uses a septic tank, a disposal adds solids to the tank. Ask your septic service first.
  • The drain. Old, corroded or slow drains should be addressed before a new unit goes in.

Mistakes that cause callbacks

  • Leaving the dishwasher knockout plug in place, so the dishwasher cannot drain.
  • Over-tightening the mounting ring, which cracks it.
  • Skipping the putty or gasket at the sink flange.
  • Wiring the unit without a proper cable clamp.
  • Reusing an old, hardened rubber coupling on the drain.

When to hire it out

If the sink has no power, if the drain is corroded or a different size, if you are unsure about the wiring, or if you want it tested and documented, a plumber is the better choice. We also check that the trap slopes correctly and that nothing under the sink is leaking. See our page on garbage disposal repair.

Frequently asked questions

Do I need an electrician to install a garbage disposal?

Not if there is already a switched outlet or a switched wired connection under the sink. If there is no power there, one has to be added by someone qualified to do it.

How long does installation take?

For a plumber, replacing an existing unit is usually a short job. A first-time installation, with new power and a new drain connection, takes longer.

Can I connect my dishwasher to the disposal?

Yes, and many homes do. The knockout plug inside the unit has to be removed so the dishwasher can drain through it, and the hose needs a high loop or an air gap.

What size disposal do I need?

A mid-size motor suits most families. Choose a larger one for heavy cooking or a larger household, if the cabinet has room.

Are disposals bad for pipes?

Not when used properly with cold water and the right food. Grease, starch and fibrous scraps are what cause trouble.