Everyone from different age groups knows the importance of a working plumbing system. And people tend to invest both money and time to find the best solution to keep that working. So, it is necessary to know the common problems faced by people due to the wrecked plumbing system. And among that list, the top problem is the clogged drain pipe.
But, how do you take care of your plumbing system? And how to clean a clogged drain pipe basement properly? We are going to share the tips one by one.
5 Ways To Clean A Clogged Drain
A clogged drain cleaning at home is not a tough job. But, you should have some knowledge and the necessary tools with you. For that, you need a drain snake, plunger, auger, gloves, and jet spray. These are the basic things that you will get easily from the local market.
Now, coming to a solution.
- Flushing water at a speed
The common causes of clogged drains are the unattended floor after each use. The fallen hair strands and wastewater from the washing machine are the reasons that your pipeline gets clogged.
To avoid that, you can flush down the clogged matter with a high-force jet spray. Just pour water in force into the pipeline and wait until the water can flow freely.
- Pouring baking soda and vinegar solution through the pipe
One of the most effective drain cleaning hacks straight from your kitchen is a vinegar and baking soda solution. Take baking soda and vinegar in a 1:2 ratio and make a solution. Now, pour the solution through the drain pipe and let it rest for a while.
The baking soda reacts with the vinegar and forms a gas that loosens up the stuck hair strands into the pipeline. As the mesh becomes airy, water can freely pass along with taking down the waste matter. So, when you flush water after the resting phase, you get a clean pipeline.
- Use the plunger to push the clogged part
Even after pouring the solution, you may see that the water flow is not like before.
You can clean that with the plunger. Keep the water flow on and adjust the plunger in the opening of the pipe. Now, push the plunger with the water flow. During this time, the dirt will push the force back. So, you have to keep the process going. After a few moments, you will be able to flush the entire clogged part.
- Pull the dirt back with a drain snake
If the above methods didn’t work, you need to use the drain snake. It is a tiny and sharp object that can be inserted within the pipeline to pull back the clogged matter. The claws in the front can grab the dirt easily.
What you are going to do is insert the drain snake until you are stuck upon the blockage. Now move the class to cling into the mesh. Once you feel that the mesh is attached to the drain snake properly, drag that out. However, for bend pipelines, this does not work.
- Call your professional plumber
If nothing worked in your favor, call your local plumbing agency and let them inspect your pipeline thoroughly. And it is necessary to keep the number of your clogged drain plumber. After all, you will never know when an emergency may arise.
So, these are the things that you can do while you are stuck with a clogged drain pipe. However, regular maintenance keeps you in the long run. So, call your plumber and keep the plumbing system in check.